→ Click here to print your print list
JCB 2CX Airmaster
Year 2003 JCB 2CX Airmaster, 521 hours, reg WM03 CYA.
Mitsubishi V8 Diesel Engines
20 Mitsubishi V8 diesel engines, twin turbo, all laying in our yard in Hawick, UK. Would sell as a parcel or seperately.
Iveco 100KVA Generators
100KVA Iveco generators. Year 2004 in large super silenced canopy, with large fuel tanks and low hours.
Benford Single Drum Walk Behind Roller
Year 2000/01/02 Benford single drum walk behind roller, electric start. Choice of four rollers.
60KVA Generators
60KVA Generator all with Iveco Engines. Aggreko built, very high quality.
Chillers
Industrial chillers available. Various sizes, all good condition. 2 x 450kw (128 Ton) 2 x 300kw (85 Ton) 10 x 200kw (56 Ton) 6 x 100kw (28 Ton) and 3 x 50kw chillers
1550KVA Generators
1550KVA Generators powered by Cummins KTTA50G2 engine. Choice of 1 available. Year 2001, new panels, rewired, alternators cleaned, checked and re-varnished. No circuit breaker, new batteries, serviced and repaired.
1500KVA Generators
1500KVA Generators powered by Cummins KTTA50G9 engines. Choice of 4 available. Year 2001, completely rewired, alternators cleaned, checked and re-varnished. Serviced and repaired. Some with new switch panels.
Cummins Power Packs with N14 450hp engine
12 x Silenced containers approximately 20ft complete with Cummins N14 450hp engine. Range from 1998 - 2000. Has been used for compressor but the compressor ends will be taken out, would make excellent canopies for generating sets, for large pumps or to be used for compressors again.
Ventilation Fans
Ventilation Fans in three sizes S/M/L. Measurements are: Small 71 x 71cm depth 34cm weight 60kg. Medium 97 x 97cm depth 48cm weight 125kg. Large 117 x 117cm depth 52cm weight 200kg.
Air Distributor
Industrial chiller air handler. Choice of 30 available, 50kw, 100kw, 200kw. Some installed in off shore lifting frame, approx year 2000.
75KVA Generators
Year 2004 75KVA Generators powered by Perkins engines in canopys. Choice of 4 available with various hours. Make F G Wilson.
Wheeled Loaders
Wheeled Loaders, two models available CG938H and CG958H, equivalent in size to CAT930 and CAT950. Operating weight 18400kg, Bucket capacity 5000kg, Fitted with US Cummins QSB6.7 engine (Euro III: 164kw/220hp), Wet axles (inboard, wet-type brakes), ROPS/FOPS Cabin with air conditioning. Photos of CG958H. Located at Alfreton, Derbyshire.
Ingersoll Rand 7/31 Compressor & Generator
Year 2006 with 6kva generator. Low hours between 500 to 700. Choice of 2 available.
Cummins Engines
1 x Cummins KTA38-G3 reconditioned engine and 1 x Cummins K19 Gen spec reconditioned and 1 x Cummins K19 in good running order engine. Also 1 x Cummins KTA50-G9 in good running order.
New Cummins Block
New Cummins block for QSK60 and QSK45 and 2 x new radiators for QSK45's.
Cummins and Perkins New Spares
Large quantity of new Perkins and Cummins spares. Starter motors, Turbo's, Filters, Fan Belts, Radiators, Electrical components and Fans. All for generators, original cost 200,000 Euro's.
125kva Generators
Year 1999 - 2001 125kva generators in super silenced canopy's, Aggrego built to a very high quality. Iveco engine's. Choice of 9 Hawick
2000kva Generator
F G Wilson Year 2002 2000kva in 40ft acoustic container powered by QSK60. Re-built engine, 2800 hours.
1500kva Generator
1500kva Gen set in 40ft acoustic container, Year 2000, powered by Cummins KTA50-G9, low hours.